Water Ionizer Deep Cleaning System

ioncleanerplus image

Product Support

The Ion Cleaner Plus™ is designed to deliver great deep cleaning service with little maintenance. follow these simple steps to ensure that your Ion Cleaner Plus™ will function properly for years into the future..

Special Note: Should your Ion Cleaner Plus™ appear to not turn on after your last use, simply pour out the cleaning solution in a container and fill the unit just above the pump with hot tap water, let it sit for 15 minutes. This will dissolve any dried up citric acid from your previous cleaning that may have clogged the impeller chamber in your pump. This will solve your problem. Next, pour out the hot water from the unit and pour back your cleaning solution back into your ICP and continue your deep cleaning.

1. Never run the Ion Cleaner Plus™ dry/without cleaning solution or water..

2. Pre-dissolve your citric acid powder in a glass of water stirring it with a spoon until it is completely dissolved, pour the predissolved solution into the Ion Cleaner Plus™ fluid resivour.

3.To get the most out of regularly deep cleaning your Kangen water® ionizer, be sure to use a double scoop of pre-dissolved citric acid, run the cleaning process for 6 to 8 hours, preferably overnight. This will slowly and safely de-scale your water ionization plate chamber. Deep cleaning can be performed every 1 to 3 months, depending on the water quality in your area.

4. Consider adding a 3 or 4 stage pre-filtration system to reduce additional chlorine, chloramine, fluoride and sediment to improve water quality and taste.

5. If your Kangen Water® ionizer is going into cleaning mode more frequently than usual, this is an indicator that it is time to deep clean your unit and perhaps change your filter. The Ion Cleaner Plus™ will enable you to maintain peak performance of your Kangen Water™ ionizer for years into the future. Regular deep cleaning is the key to protecting your valuable investment.

6. A good indicator of whether your ionizer plate chamber is clean can be determined with an "ORP" Oxidation Reduction Potential meter. In the same fashion, if the ORP reading is very low, this is a good indicator that it's time for a factory deep cleaning. We also strongly recomment a factory deep cleaning as a smart precurser to regular deep cleaning with the Ion Cleaner Plus™ to be sure that you're off to a good start.

7. When water is drawn from a well maintained water ionizer, (a clean ionization plate chamber) it will appear cloudy, some people misinterpret this cloudiness, in reality this is a good indicator that your Kangen Water ionizer™ is functioning as intended. In the case of Kangen Water™ Ionizers, this means that the water ionizer plate surface/chamber is performing properly. This is the presence of the most valuable property in ionized water, ORP or Oxidation Reduction Potential, a very high free radical neutralizing antioxidant.

Deep Cleaning Demo

Questions and Answers

Follow us, and learn more.

Like us on facebook.